CurrentLoopFeedforwardBusVoltage Parameter
Default Value: 0.0
Minimum Value: 0.0
Maximum Value: 680.0
Units: volts
Type: float
HARDWARE: This parameter does not apply when used with the GL4, iXL2e, XL2e, XL4s, iXL5e, XL5e, iXR3 with an XSL3 amplifier, and XR3 with an XSL3 amplifier.
IMPORTANT: This parameter applies only when you enable the Use Feedforward setting of the CurrentLoopSetup Parameter.
Use the CurrentLoopFeedforwardBusVoltage parameter to specify the motor bus voltage used to calculate feedforward for the current loop for a PWM amplifier. The units of this parameter are volts. The CurrentLoopFeedforwardBusVoltage parameter can be set to the DC bus voltage of the drive.
