Default Value: 0.0
Minimum Value: 0.0
Maximum Value: 1000.0
Units: None
Type: double
For information about how to view or change the value of this parameter, refer to the Loop Shaping Toolbar section of the Frequency Response Module.
To configure Enhanced Tracking Control parameters in Automation1 Studio, open the Configure Workspace. In the Axes category, select the Optimization topic and find the Enhanced Tracking Control Module.
|
For the most up-to-date version of Help, visit the Automation1 online Help site. |
|
|
Copyright © 1994 - 2025 AEROTECH US. ALL RIGHTS RESERVED. |
Connect with Aerotech, Inc.
|
