Installation Overview
This image shows the order in which to make connections and settings that are typical to the XL4s. If a custom interconnect drawing was supplied with your system, that drawing is on your Storage Device and shows as a line item on your Sales Order in the Integration section.
Figure: Installation Connection Overview
1 |
Connect a PC HyperWire port to the HyperWire In port. |
|
2 |
Connect the Digital/Analog I/O. |
|
3 |
Connect the Stage motor and feedback connector. |
|
4 |
Connect to the Control Supply connector. |
|
5 |
Connect to the Motor Supply connector. |