Default Value: 100.0
Minimum Value: 0.0
Maximum Value: None
Units: velocity
Type: double
Use the MaxJogSpeed parameter to set the maximum permitted speed that the controller uses when you jog the axis in Aerotech Automation1 Studio. The default jog speed is initialized to one-half of the value that you specify for this parameter.
|
For the most up-to-date version of Help, visit the Automation1 online Help site. |
|
|
Copyright © 1994 - 2025 AEROTECH US. ALL RIGHTS RESERVED. |
Connect with Aerotech, Inc.
|
