CurrentOffsetA Parameter
Default Value: 0.0
Minimum Value: -1000.0
Maximum Value: 1000.0
Units: amperes milliamps
Type: float
The CurrentOffsetA parameter compensates for steady-state offset error in phase
The drive uses phase A and phase B current feedback to calculate phase C current feedback. Thus, the offset specified by the CurrentOffsetA parameter will also be used to correct phase C current feedback that is used in the current loop.
Automation1 drives automatically adjust for feedback offsets each time the system is reset. It is not necessary for you to set this parameter to a nonzero value in most conditions.
