Voltage Selection Operation
DANGER: Voltage selector settings must not be changed with Mains power applied to the unit.
DANGER: Wait at least ten (10) minutes after removing the power supply before performing maintenance or an inspection. Otherwise, there is the danger of electric shock.
WARNING: The voltage selector must be configured to match the AC line voltage on the Motor Supply Connector and is factory-configured based on the options that you ordered. You could damage the unit if the voltage selector is set for the incorrect AC input voltage.
If the user changes the voltage selector settings, it is also the user's responsibility to change the iXL5e/XL5e AC power label located next to the Motor Supply connector. Refer to the Electrical Specifications for power ratings.
Procedure for setting AC voltage selector switches:
- Turn-off and disconnect all power from unit.
- Set the S1 and S2 switches for your voltage on the Motor Supply Connector.
NOTE: Refer to Voltage Selection Switch Access to see how switch position relates to voltage selection. - Apply a visible indicator on the drive that lets the user know that the voltage input configuration has changed and that the factory order part number no longer represents the current configuration.
