Installation Overview
The images that follow show the order in which to make connections and settings that are typical to the iXI4/XI4. If a custom interconnect drawing was supplied with your system, that drawing is on your Storage Device and shows as a line item on your Sales Order in the Integration section.
IMPORTANT: Standard and OEM connections are the same. Standard view shown.
Figure: Installation Connection Overview (iXI4 4-Axis Shown)
1 |
Connect the motor feedback and amplifier to the Axis Connectors. |
|
2 |
Connect the PC to the USB or Ethernet port. |
N/A |
3 |
Connect the next drive in the system to the HyperWire Out port. |
|
4 |
Connect additional I/O as required by your application. |
Digital I/O Connector / Analog I/O and Laser Interface Connector |
5 |
Connect the power supply to the Control Supply. |
IMPORTANT: Standard and OEM connections are the same. Standard view shown.
Figure: Installation Connection Overview (XI4 4-Axis Shown)
1 |
Connect the motor feedback and amplifier to the Axis Connectors. |
|
2 |
Connect the PC HyperWire to the HyperWire In port. |
|
3 |
Connect additional I/O as required by your application. |
Digital I/O Connector / Analog I/O and Laser Interface Connector |
4 |
Connect the power supply to the Control Supply. |