Installation Overview
The images that follow show the order in which to make connections and settings that are typical to the SI4. If a custom interconnect drawing was supplied with your system, that drawing is on your Storage Device and shows as a line item on your Sales Order in the Integration section.
Figure: Installation Connection Overview (4 Axis Shown)
| 1 |
Connect the motor feedback and amplifier to the Axis Connectors. |
|
| 2 |
Connect the PC HyperWire to the HyperWire In port. |
|
| 3 |
Connect additional I/O as required by your application. |
|
| 4 |
Connect the power supply to the Control Supply. |
Figure: Installation Connection Overview (4 Axis OEM Shown)
| 1 |
Connect the motor feedback and amplifier to the Axis Connectors. |
|
| 2 |
Connect the PC HyperWire to the HyperWire In port. |
|
| 3 |
Connect additional I/O as required by your application. |
|
| 4 |
Connect the power supply to the Control Supply. |