SecondaryUnitsScaleFactor Parameter

Default Value: 0.03937007874015748031496062992126

Minimum Value: 0.0

Maximum Value: None

Units: None

Type: double

IMPORTANT: This parameter applies only to dominant axes. For information about axis types, refer to Axes Category.

Use the SecondaryUnitsScaleFactor parameter to specify the scale factor from primary units to secondary units. The value of this parameter is used to scale distances, velocities, and accelerations of dominant axes when in secondary units mode.

This parameter applies to dominant axes only. Dependent axes are always in primary units.

Set this parameter to the number of secondary units per primary unit. For example, if primary units are millimeters and secondary units are inches, the value of this parameter should be 1 / 25.4.