Default Value: -1
Minimum Value: -1
Maximum Value: 31
Units: None
Type: int
WARNING: Do not change this parameter while the spindle is in motion.
Use the SpindleAxis parameter to specify which axis is used for the spindle axis of the selected task. This axis must be a dependent axis. You must specify an axis index. Axis indexes are zero-based.
To disable the spindle, set this parameter to -1.
|
For the most up-to-date version of Help, visit the Automation1 online Help site. |
|
|
Copyright © 1994 - 2024 AEROTECH US. ALL RIGHTS RESERVED. |
Connect with Aerotech, Inc.
|
