AutofocusTarget Parameter
Default Value: 0.0
Minimum Value: -10.0
Maximum Value: 10.0
Units: volts
Type: float
HARDWARE: Autofocus does not apply when used with the GI4, the GL4, or the XL4s.
Use the AutofocusTarget parameter to specify the target value, or set-point, for the autofocus loop, in volts. Because the autofocus target is specified in volts, if you have the AutofocusInput Parameter configured for the Auxiliary Encoder Input, you can use the AutofocusEncoderScaleFactor parameter to specify the volts per encoder count of the auxiliary feedback value. To see the structure of the autofocus loop and guidance on tuning, refer to the Autofocus Functions topic.
