AnalogFilterSetup Parameter
Default Value: 85
Minimum Value: None
Maximum Value: None
Units: None
Type: int
Parameter Settings and Values
This table shows the value of the configuration for the parameter setting.
Table: Parameter Settings, Configurations, and Values
| Settings | Configurations | Value |
|---|---|---|
|
Input 0 Filters |
Filter 0 Enabled |
0x00000001 |
|
Filter 1 Enabled |
0x00000002 |
|
|
Input 1 Filters |
Filter 0 Enabled |
0x00000004 |
|
Filter 1 Enabled |
0x00000008 |
|
|
Input 2 Filter |
Fixed 250Hz Low-Pass |
0x00000010 |
|
Input 3 Filter |
Fixed 250Hz Low-Pass |
0x00000040 |
The AnalogFilterSetup parameter configures the settings related to the second-order digital filters on the analog inputs. The sections that follow give the possible settings for this parameter.
Tip: In the Analog Input Filters section of I/O in Studio, click View Coefficients to see the analog input filter coefficient parameters and their setup parameter. To see only the summary of filter specifications, click View Filters.
Input 0 Filters
Filter 0 Enabled is the default and enables filter 0 on analog input 0.
When you select Filter 1 Enabled, filter 1 is enabled on analog input 0.
Input 1 Filters
Filter 0 Enabled is the default and enables filter 0 on analog input 1.
When you select Filter 1 Enabled, filter 1 is enabled on analog input 1.
Input 2 Filter
HARDWARE: This setting applies only to the drives and configurations that follow:
Table: Applicable Drive Types
| Drive Type | Options |
|---|---|
| GI4 | Standard |
| iXA4 | Uses the -EB1 or -EB2 I/O board |
| iXA4 | Uses the -EB1 or -EB2 I/O board |
| iXC4 | Uses the optional I/O board |
| XC4 | Uses the optional I/O board |
| iXC4e | Uses the optional I/O board |
| XC4e | Uses the optional I/O board |
| iXC6e | Uses the optional I/O board |
| XC6e | Uses the optional I/O board |
| iXI4 | Standard |
| XI4 | Standard |
| iXL5e | Uses the optional I/O board |
| XL5e | Uses the optional I/O board |
The filter is enabled on analog input 2 by default. The value of this filter is programmed as a 250 Hz low-pass filter. You cannot change the value of this filter. To disable this filter, clear the Fixed 250Hz Low-Pass box.
Input 3 Filter
HARDWARE: This setting applies only to the drives and configurations that follow:
Table: Applicable Drive Types
| Drive Type | Options |
|---|---|
| GI4 | Standard |
| iXA4 | Uses the -EB2 I/O board |
| XA4 | Uses the -EB2 I/O board |
| iXA4 | Uses the optional I/O board |
| XA4 | Uses the optional I/O board |
| iXC4 | Uses the optional I/O board |
| XC4 | Uses the optional I/O board |
| iXC4e | Uses the optional I/O board |
| XC4e | Uses the optional I/O board |
| iXC6e | Uses the optional I/O board |
| XC6e | Uses the optional I/O board |
| iXI4 | Standard |
| XI4 | Standard |
| iXL5e | Uses the optional I/O board |
| XL5e | Uses the optional I/O board |
The filter is enabled on analog input 3 by default. The value of this filter is programmed as a 250 Hz low-pass filter. You cannot change the value of this filter. To disable this filter, clear the Fixed 250Hz Low-Pass box.
