HP Elite Tower 600 G9 Specifications and BIOS Settings

General Specifications

  • HP Elite Tower 600 G9

  • Processor: Intel® Core™ i5-12600

Controller Support

The list that follows includes support information for Automation1 2.7 and newer and Automation1 2.6 and older.

  • Automation1 2.7 and newer: The HP Elite Tower 600 G9 requires INtime 7, which is automatically installed by the Automation1 iSMC installer if INtime is not currently on the PC.

  • Automation1 2.6 and older: The HP Elite Tower 600 G9 can have problems because of the version of INtime that comes with Automation1 2.6 and older. Contact Aerotech Global Technical Support for instructions on how to manually apply a custom INtime 7 upgrade so that this PC works with Automation1.

Windows Support

  • Automation1 was tested with the HP Elite Tower 600 G9 to make sure it works with Windows 11.
  • By default, Trusted Platform Module (TPM) is enabled on Windows 11 configurations. You must disable TPM and all of the features that depend on it, such as BitLocker and drive encryption, so that Automation1 has good real-time performance.

Configuration Tested by Aerotech

The list that follows includes information to take note of when purchasing the HP Elite Tower 600 G9.

  • Intel 12th generation processors can contain P-cores (Performance-cores) and E-cores (Efficient-cores). If you select an i5, i7, or i9 processor with E-cores, you must disable the E-cores in the BIOS so that you can use the PC with Automation1.

  • You can select a different amount of RAM. But, make sure that you order two RAM sticks so that you can use both CPU memory channels.

  • You can customize the size of your SSD.

  • Integrated Intel UHD Graphics 770 gives you better real-time performance than a dedicated graphics card.

Table: Aerotech Testing Configuration

HP Elite Tower 600 G9 260W RCTO BU DT PC
Win 11 Pro 64
Intel Core i5-12600 6C 3.30G 65W
16 GB (2x8 GB) DDR5 4800 UDIMM Mem
512GB PCIe NVMe TLC SSD
No Intel vPro
No Front Opt Port
No Rear Flx IO Prt
No Included ODD
HP 600 G9 TWR CKIT

BIOS Settings

Aerotech tested the BIOS version that follows:

  • BIOS Version/Date: HP U01 Version 02.14.02, 4/25/2024
  • BIOS Version/Date: HP U01 Version 02.15.20, 9/12/2024
  • BIOS Version/Date: HP U01 Version 02.18.00, 3/04/2025

Tip: To enter the BIOS, press ESC on boot.

Table: BIOS Settings for HP Elite Tower 600 G9

SecurityTab
TPM Embedded Security

TPM Device

Hidden

TPM State

Disabled
Secure Boot Configuration
Secure Boot Enabled
Secure Platform Management (SPM)
HP Cloud Managed Disabled
Remote Device Management Disabled
BIOS Sure Start
Dynamic Runtime Scanning of Boot Block Disabled
Enhanced HP Firmware Runtime Intrusion Prevention and Detection Disabled
Sure Start Secure Boot Keys Protection Disabled
Virtualization Based BIOS Protection Disabled
System Management Command Disabled
Advanced Tab
Boot Options
Audio Alerts During Boot Disabled
Fast Boot Disabled
System Options
Turbo-Boot Disabled
Hyperthreading Disabled
Virtualization Technology (VTx) Disabled
Virtualization Technology for Directed I/O (VTd) Disabled
Active All Efficient-cores Disabled
HP Application Driver Disabled

Built-in Device Options

Audio Device Disabled

Power Management Options

Runtime Power Management Disabled
Extended Idle Power States Disabled
S4/S5 Maximum Power Savings Disabled
SATA Power Management Disabled
PCI Express Power Management Disabled

Windows Settings

To see the Windows settings that you must change, refer to Optimizing Automation1 Performance.

During testing, Aerotech uninstalled all HP software from Apps & Features in Windows to prevent performance issues.