High-Speed Input

The High-Speed ± input is used for the hardware Drive Data Capture feature. The delay time through the high-speed opto devices is 50 nsec (typical). The high-speed input is scaled for 5-24 VDC input and can be used with sourcing or sinking drivers.

Table: High-Speed Input Pins on the PSO Connector

Pin #	Description	In/Out/Bi
1	High-Speed Input 0+	Input
14	High-Speed Input 0-	Input

Table: High-Speed Input Specifications

Specification (HCPL-0630)	Value
Input Voltage	5-24 V
Input Current	10 mA

Figure: High-Speed Input Schematic