Analog Output 0
The analog output can be set from within a program or it can be configured to echo the state of select servo loop nodes.
The analog output is set to zero when you power on the system or reset the drive.
Table: Analog Output Specifications
|
Specification |
Value |
|---|---|
|
Output Voltage |
-10 V to +10 V |
|
Output Current |
5 mA |
|
Resolution (bits) |
16 bits |
Table: Analog Output Pins on the Auxiliary I/O Connector
|
Pin# |
Description |
In/Out/Bi |
|---|---|---|
|
22 |
Analog Output 0 |
Output |
|
23 |
Analog Common |
Output |
Figure: Analog Output 0 Schematic
