Board Assembly
Control Board Assembly highlights the important components located on the control board.
DANGER: Before you open the GL4 chassis, you must disconnect the Mains power connection.
Figure: Control Board Assembly
Table: Control Board Fuse Specifications
| Fuse | Description | Size | Aerotech P/N |
Third Party P/N |
|---|---|---|---|---|
| F1 | Control Supply Power at Pin-1 | 2 A S.B. | EIF01048 | Littelfuse 0875002.MXEP |
| F2 | Control Supply Power at Pin-1 | 2 A S.B. | EIF01048 | Littelfuse 0875002.MXEP |
|
F6 |
HyperWire power |
-- |
-- |
-- |
| NOTE: F6 is a resettable fuse. It is not necessary to replace the fuse. Turn off the power and remove the short circuit. | ||||
DANGER: Before you open the GL4 chassis, you must disconnect the Mains power connection.
Table: Power Board Fuse Specifications
| Fuse | Description | Size | Aerotech P/N |
Third Party P/N |
|---|---|---|---|---|
| F1 | Motor Bus Supply | 10 A S.B. | EF01020 | Littelfuse 215010.P |
| F2 | Motor Bus Supply | 10 A S.B. | EF01020 | Littelfuse 215010.P |
| NOTE: F1 and F2 are on the bottom of the board. | ||||