AutofocusSpeedClamp Parameter

Default Value: 0.0

Minimum Value: 0.0

Maximum Value: None

Units: velocity

Type: double

When you use this parameter in an AeroScript program, the parameter value is in the units specified by the unit mode of the task:

  • If the task is in primary units mode, this parameter is in primary units.
  • If the task is in secondary units mode, this parameter is in secondary units.

HARDWARE: Autofocus does not apply when used with the GI4, the GL4, or the XL4s.

Use the AutofocusSpeedClamp parameter to set the maximum speed at which the axis will be commanded to move while under autofocus control. If you specify zero as the value for this parameter, there is no speed limit.