Default Value: 150.0
Minimum Value: -30.0
Maximum Value: 150.0
Units: volts
Type: float
WARNING: This parameter is for Aerotech only. Do not change this parameter unless a person from Aerotech gives you instructions. If you set this parameter to an incorrect value, failure and damage to the motor can occur.
HARDWARE: This parameter applies only when used with the iXR3 or the XR3. If you use an XR3, it must have a QSL3e amplifier.
|
For the most up-to-date version of Help, visit the Automation1 online Help site. |
|
|
Copyright © 1994 - 2024 AEROTECH US. ALL RIGHTS RESERVED. |
Connect with Aerotech, Inc.
|
